Product ID:WTI O-1
MSDS Date:09/20/1989
FSC:3439
NIIN:00F025603
MSDS Number: BPSJH

WELD TECH INTERNATIONAL INC

10200 CHESTER ROAD
CINCINNATI, OH 45215
US

Emergency Phone: 513-772-5005

Info Phone: 513-772-5005

Cage: WELDT

WELD TECH INTERNATIONAL INC

CINCINNATI, OH 45215 US

Telephone: 772-5005

Cage: WELDT

CARBON, GRAPHITE

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 0.095%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

AMORPHOUS FUSED SILICA, SILICON DIOXIDE, QUARTZ, SILICON

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 0.3-1%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

MANGANESE, MN COMPOUNDS

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 1.10%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 0.5%

OSHA PEL 1 MG/CUM (CEILING)

ACGIH TLV: 0.5 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

VANADIUM

CAS: 1314-62-1

RTECS: YW1355000

Fraction By Weight: 0.1%

OSHA PEL C,0.5 MG/M3

ACGIH TLV: 0.05 MG/M3RDUST;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TUNGSTEN (INSOLUBLE), WOLFRAM

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 0.5%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: INJURY. SKIN: BURNS. INHALATION:
DISCOMFORT, DIZZINESS, NAUSEA, OR DRYNESS/IRRITATION OF THE THROAT.
Explanation of Carcinogenicity:SEE INGREDIENTS & SUPPLEMENTAL.
Effects of Overexposure:INHALATION: PULMONARY IRRITATION OR
PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTIONS OR
ILLNESS

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED,
PERFORM ARTIFICIAL RESPIRATION. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Flash Point:NON-FLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC, OPEN FLAME & SPARK CAN
IGNITE COMBUSTIBLES.

Handling and Storage Precautions:AVOID HUMIDITY & SHOCKS. ELECTRIC
SHOCK FROM ARC WELDING EQUIPMENT CAN KILL. READ/UNDERSTAND
MANUFACTURER'S INSTRUCTIONS/LABEL.
Other Precautions:WELDING ELECTRODES & WIRES ARE NONHAZARDOUS SOLIDS AT
AMBIENT TEMPERATURES. ACTUAL EXPOSURE SHOULD BE DETERMINED BY
MONITORING THE FUME IN THE OPERATOR'S BREATHING ZONE.

Respiratory Protection:USE ENOUGH VENTILATION TO KEEP THE FUMES & GASES
BELOW TLV'S IN THE WORKER'S BREATHING ZONE & THE GENERAL AREA.
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL): REQUIRED.
Protective Gloves:WELDERS
Eye Protection:COLORED ABSORPTIVE GLASSES
Other Protective Equipment:WELDING HELMET & PROTECTIVE CLOTHING SUCH AS
LEATHER APRON.
Supplemental Safety and Health
COMPOUNDS OF CHROMIUM IN THE FUMES PRODUCED SHOULD BE CONSIDERED
POSSIBLE CARCINOGENS. NO CLEAR ASSOCIATION HAS BEEN ESTABLISHED
BETWEEN CHROMIUM IN WELDING FUME & THE DEVELOPMENT OF CANCER.

Appearance and Odor:SOLID WIRE OR ROD. RODS ARE COATED W/FLUX FOR
WELDING PROCESS.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HUMIDITY
Hazardous Decomposition Products:WELDING FUMES BUILT DURING WELDING
PROCESS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.